Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual page 143

Options on the General page
Table 10-15
Option
Listen port
Default profile
ActiveDirectoryIntegration
AllowRemoteConfiguration
Intel SCS Server
Remote Configuration
Certificate status
Use one time password
About Out of Band Management Component pages
Description
Each instance of Intel SCS listens for Hello messages from
the Intel AMT devices on a defined TCP port. Type the TCP
port that you want Intel SCS to use for listening.
The default port is 9971.
Select the profile that you want to assign to new Intel AMT
computers by default.
If checked, the Intel SCS server adds AMT objects to Active
Directory. This enables the use of Kerberos authentication
and the Active Directory users list. Active Directory is also
required for 802.1x profiles. Before you check this option,
you must integrate Intel SCS with Active Directory.
See "Integrating Intel SCS with Active Directory"
on page 55.
Intel AMT releases 2.2, 2.6, 3.0, 4.0, 5.0 and later support
Remote Configuration.
Check this option to enable Intel SCS to accept Remote
Configuration requests from Intel AMT devices.
See "Initializing Intel AMT computers using the Remote
Configuration feature" on page 65.
Displays the FQDN of the OOB site server computer with
which Out of Band Management Component is configured
to work.
Displays the status of the Remote Configuration certificate.
If you want to use Remote Configuration, you must install
a valid certificate.
See "Initializing Intel AMT computers using the Remote
Configuration feature" on page 65.
Check to require a one-time password (OTP) exchange
between Intel SCS and the Intel AMT device that is
requesting setup and configuration. This feature adds more
security.
143
General page