Cutter Blade Maintenance - Dixon ZTR ZTR 2301 Operator's Manual

CARE AND MAINTENANCE

CUTTER BLADE MAINTENANCE:

NOTE: Observe proper blade position prior to removal.
1. Safely raise front of mower.
2. Hold or block blade from turning.
3. Loosen blade nut and remove blade.
4. When replacing blade, tighten blade nut secur
CAUTION
NOTE:
Page 30
Wear heavy, thick gloves when holding onto cutter blade, avoid the
sharp edge of the blade.
Be sure blade is centered on pilot before tightening nut to 60 ft. lbs.
torque.
ely. Refer to diagram.