Configuring Leap Settings In The Network Credentials Tab - Cisco AIR-CB21AG-W-K9 Installation And Configuration Manual

Chapter 3 Configuring EAP Types
Figure 3-8
Select LEAP from the "Choose a network authentication method" drop down list.
Step 7
Click the Settings button. You are now ready to configure settings for LEAP.
Step 8

Configuring LEAP Settings in the Network Credentials Tab

The user provides one of the following types of network credentials:
•
•
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
OL-16534-01
Wireless Network Properties Window
Windows username and password—The Windows username and password are used as network
access credentials. The user is not prompted to enter a username and password if this option is
selected.
Prompted user credentials—The user is prompted during authentication for credentials. These
credentials are credentials that are separate from the Windows username and password, such as
Lightweight Directory Access Protocol (LDAP) credentials.
Configuring LEAP
3-19