The PEAP-GTC XML Schema
<xs:complexType name="TokenSource">
<xs:choice>
<xs:element name="passwordFromOtherToken" type="Empty">
<xs:annotation>
token</xs:documentation>
</xs:annotation>
</xs:element>
</xs:choice>
</xs:complexType>
<xs:complexType name="TunnelMethods">
<xs:sequence>
<xs:choice>
<xs:element name="validateServerCertificate" type="serverCertificateValidationParameters"/>
<xs:element name="doNotValidateServerCertificate" type="Empty"/>
</xs:choice>
<xs:element name="unprotectedIdentityPattern" type="IdentityPattern" minOccurs="0">
<xs:annotation>
if a client certificate is used for authentication then placeholder's values shall be obtained from the CN
field of the client certificate. if the credentials are obtained from the end-user then they shall be obtained
from the information the user enters. if the credentials are obtained from the operating system then they
shall be obtained from the information the logon provides.</xs:documentation>
</xs:annotation>
</xs:element>
<xs:choice>
<xs:element name="enableFastReconnect">
</xs:element>
<xs:element name="disableFastReconnect" type="Empty"/>
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
4-20
<xs:documentation>this will result in a prompt to user to obtain identity and otp from
<xs:documentation>If the [username] and/or [domain] placeholders are used in the pattern then:
<xs:complexType>
<xs:complexContent>
<xs:extension base="Empty">
<xs:choice>
<xs:element name="alwaysAttempt" type="Empty"/>
</xs:choice>
</xs:extension>
</xs:complexContent>
</xs:complexType>
Chapter 4
Performing Administrative Tasks
OL-16534-01