Configuring Advanced Settings; Disabling Static Wep, Wpa/Wpa2 Passphrase, Or Eap - Cisco Aironet CB21AG Installation And Configuration Manual

Setting Security Parameters

Configuring Advanced Settings

To specify a server or domain name and a login name to use for authenticating user credentials (see
Figure
Figure 5-19
Step 1 Leave the Specific Server or Domain field blank to allow the client to accept a certificate from any server
that supplies a certificate signed by the selected certificate authority or enter the domain name of the
server from which the client will accept a certificate.
If the Login Name field is not filled in automatically, enter your username with nothing after it (for
Step 2
example, jsmith).
Click OK to save your settings.
Step 3

Disabling Static WEP, WPA/WPA2 Passphrase, or EAP

To disable static WEP, WPA/WPA2 passphrase, or EAP authentication [LEAP, EAP-FAST, EAP-TLS,
PEAP (EAP-GTC), or PEAP (EAP-MSCHAP V2)] for a particular profile, choose None on the Profile
Management (Security) window and click OK.
Choosing any security option other than Pre-Shared Key (Static WEP) on the Profile Management
Note
(Security) window disables static WEP automatically.
Choosing Pre-Shared Key (Static WEP) or WPA/WPA2 Passphrase on the Profile Management
Note
(Security) window disables EAP automatically.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
5-58
5-19), follow these steps:
Configure Advanced Settings
Chapter 5 Configuring the Client Adapter
OL-4211-05