Troubleshooting With Cisco Aironet Client Diagnostics - Cisco AIR-CB21AG-W-K9 Installation And Configuration Manual

Troubleshooting with Cisco Aironet Client Diagnostics

Troubleshooting with Cisco Aironet Client Diagnostics
Cisco Aironet Client Diagnostics is a mode that identifies communication problems between the client
adapter and a wireless LAN infrastructure device. When in this mode, the client adapter and the
infrastructure device proceed through a defined set of tests. The results of these tests can assist in
isolating conditions that require troubleshooting.
Cisco Aironet Client Diagnostics can only be started manually. To start this mode, follow these steps:
Verify that the client adapter radio is enabled. If the radio is not enabled, enable it.
Step 1
Choose Start > Control Panel > Network and Sharing Center. The Network and Sharing Center
Step 2
window opens (see
Figure 6-1
Click Cisco Aironet Client Diagnostics. The Cisco Aironet Client Diagnostics dialog box appears (see
Step 3
Figure
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
6-2
Figure 6-1).
Network and Sharing Center Window
6-2).
Chapter 6 Troubleshooting and Diagnostics
OL-16534-01