Logging For Eap Modules; Configuring And Starting Logging - Cisco AIR-CB21AG-W-K9 Installation And Configuration Manual

Logging for EAP Modules

Logging for EAP Modules

To generate logs to assist with troubleshooting, the EAP-FAST, LEAP, and PEAP-GTC modules utilize
Windows Event Log Service. The logs include information such as the type of event, the event location,
the function that was affected by the event, and the date and time of the event.
The following sections contain information about logging:
•
•
•

Configuring and Starting Logging

To access the administrator command prompt and to configure and start logging, perform the following
steps:
Choose Start > All Programs > Accessories.
Step 1
Right-click Command Prompt and select Run as administrator.
Step 2
Step 3 At the prompt, enter the following command to configure and start logging:
•
•
•
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
4-26
Configuring and Starting Logging, page 4-26
Disabling Logging and Flushing Internal Buffers, page 4-27
Locating Log Files, page 4-28
For EAP-FAST
wevtutil sl Cisco-EAP-FAST/Debug /e:true /k:category_mask /l:log_level
For PEAP-GTC
wevtutil sl Cisco-EAP-PEAP/Debug /e:true /k:category_mask /l:log_level
For LEAP
wevtutil sl Cisco-EAP-LEAP/Debug /e:true /k:category_mask /l:log_level
Chapter 4 Performing Administrative Tasks
OL-16534-01