Cisco AIR-AP1252AG-A-K9 Hardware Installation Manual page 61

Chapter 2 Installing the Access Point
Grasp the radio module and use your thumb to push the module latch to the open position while pulling
Step 2
the radio module (see
Figure 2-25
1
Push module latch to open
When the module latch reaches the open position (see
Step 3
the access point.
OL-8247-03
Figure 2-25).
Opening the Module Latch
48vDC
1
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
Removing a Radio Module
Figure 2-24), gently pull the radio module from
2-33