Cisco AIR-AP1252AG-A-K9 Hardware Installation Manual page 29

Installing the Access Point
This chapter describes the installation of the access point and includes these sections:
Safety Information, page 2-2
•
Warnings, page 2-2
•
• Unpacking the Access Point, page 2-3
• Basic Installation Guidelines, page 2-4
• Before Beginning the Installation, page 2-4
Installation Summary, page 2-5
•
Mounting Overview, page 2-5
•
Mounting on a Horizontal or Vertical Surface, page 2-7
•
Mounting Below a Suspended Ceiling, page 2-9
•
Mounting Above a Suspended Ceiling, page 2-11
•
Mounting to a Network Cable Box, page 2-18
•
Mounting on a Desktop or Shelf, page 2-19
•
Connecting the Ethernet and Power Cables, page 2-20
•
Powering Up the Access Point, page 2-22
•
Installing the Access Point to the Mounting Plate, page 2-24
•
Securing the Access Point, page 2-27
•
• Removing the Access Point From the Mounting Plate, page 2-30
• Removing a Radio Module, page 2-32
• Inserting a Radio Module, page 2-34
OL-8247-03
C H A P T E R
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
2
2-1