Diagnostics and Other Utilities
When you select the Diagnostics and Utilities feature from the System
Configuration Utility main menu, the utility provides prompts to test,
inspect, upgrade, and diagnose the server.
Diagnostics and Utilities are located on the system partition on the hard
drive and must be accessed when a system configuration error is
detected during the Power-On Self-Test (POST).
Run the Inspect Utility once the computer has been configured to get
information about the operating system environment.
For instructions on using the Diagnostics Utility and other Compaq utilities,
refer to the Compaq Systems Reference Library CD.
For use with Intel Pentium II Xeon processor-based servers only
Compaq ProLiant 5500 Servers Setup and Installation Guide
5-5