Configuring Audio I/O - PRESONUS AUDIOBOX USB - V 2.0 User Manual

GETTING STARTED

2.2.4 Configuring Audio I/O

Now that you've configured your MIDI devices, let's create a new Song and set up your
default Audio I/O.
STEP 1
STEP 2
If you plan on importing loops into your Song, you may want to select "Stretch Audio Loops
to Song Tempo" so that any loop of a known BPM (like those in the included content library)
will import at the correct tempo.
STEP 3
STEP 4
From the Start page, select "Create a new Song."
To begin a new Song, select "Empty Song" from the Templates list.
At this point, you should give your Song a name and select your
preferred sample rate and bit depth. You can also determine the
length of your Song and the type of time format you would like to
use (Notation Bars, Seconds, Samples, or Frames). Click the OK
button when you are finished.
When the Song window launches, launch the Audio Setup window
by going to File | Options... (PC) or Studio One | Preferences
(Mac), and click on the Audio Setup button.
Click on the Song Setup button to open the Song Setup window, then
click on the on the Audio I/O Setup icon.
15 | PreSonus 2008