Enabling The Audio Driver - PRESONUS AUDIOBOX USB - V 2.0 User Manual

GETTING STARTED

2.2.2 Enabling the Audio Driver

Studio One and Studio One Artist were designed with PreSonus interfaces in mind. Your
AudioBox USB is already integrated into Studio One Artist, so setup is quick and easy. When
Studio One Artist is launched, by default you will be taken to the Start page. On this page,
you will find document management and device configuration controls, as well as a
customizable artist profile, a news feed, and links to demos and tutorials from PreSonus. If
you have an Internet connection on your computer, these links will be updated as new
tutorials become available on the PreSonus Web site.
Complete information on all aspects of Studio One Artist is available in the Reference
Manual PDF located on the Studio One Artist Installation disc. The information in this
manual covers only the most basic aspects of Studio One Artist and is intended to get you set
up and recording as quickly as possible.
•
Start Page: Setup Area
After you have verified that the PreSonus driver has been detected, please continue to the next
Section to set up your external MIDI devices. If you do not have any MIDI devices to connect at
this time, please skip to Section 2.2.4: Configuring Audio I/O.
Shows Active Audio Driver and Sample Rate and Provides
Quick Links to Configure Audio and MIDI
In the middle of the Start page, you will see the Setup area.
Studio One Artist automatically scans your system for all
available drivers and selects a driver. By default, it will
choose a PreSonus driver if one is available.
Selecting a Different Audio Driver From the Start Page
If you do not see your AudioBox USB audio driver on the
Start page when you launch Studio One, click on the
Configure Audio Devices link in the Setup area to open the
Audio Setup Options window.
In the Audio Device menu, select the driver for your
PreSonus interface. Click the Apply button and then OK.
11 | PreSonus 2008