PRESONUS AUDIOBOX USB - V 2.0 User Manual page 15

GETTING STARTED
STEP 3
Specify which MIDI channels will be used to communicate with this keyboard. For most
purposes, you should select all MIDI channels. If you are unsure of which MIDI channels to
select, we suggest you select all 16.
STEP 4
In the Receive From drop down menu, select the MIDI interface output from which Studio
One Artist will receive MIDI data from your sound module. In most cases, your sound module
will not need to send information to Studio One, so you can leave this unspecified.
Click OK and close the External Devices window. You are now ready to start recording in
Studio One Artist. The remainder of this guide will go over how to set up a Song and will
discuss some general workflow tips for navigating through the Studio One Artist enviroment.
The Add Device window will launch.
From the menu on the left, select "New Instrument." At this point you
can customize the name of your sound module by entering the
manufacturer and device names.
In the Send To drop down menu, select the MIDI interface
output from which Studio One Artist will send MIDI data to
your sound module. In this case, AudioBox USB.
14 | PreSonus 2008