Cf_Shutrcprot Command; Cf_Shutkeyprot Command; Cf_Shuth Command; Cf_Shuteffect Command - Sanyo PDG-DHT8000L - 8000 Lumens Specifications

PDG-DHT8000L Expand Serial Command Functional Specifications

8.9.55 CF_SHUTRCPROT Command

Command "CF_SHUTRCPROT_%1" [CR]
"ON" ------------------ Disable RC key from controlling Shutter (Protection On)
%1
"OFF" ----------------- Enable RC key to control Shutter (Protection Off)
Set valid / invalid of RC use on Shutter control function
Details
(Valid only when in the normal Power ON status)
Acceptable
Response
Unacceptable

8.9.56 CF_SHUTKEYPROT Command

Command "CF_SHUTKEYPROT_%1" [CR]
"ON" --------- Disable key on the side panel from controlling Shutter (Protection On)
%1
"OFF" -------- Enable key on the side panel to control Shutter (Protection Off)
Set valid / invalid use of key on the side panel on Shutter control function.
Details
(Valid only when in the normal Power ON status)
Acceptable
Response
Unacceptable

8.9.57 CF_SHUTH Command

Command "CF_SHUTH_%1" [CR]
"005"-"480"----------Specify setting time directly
%1 "UP" ------------------ Add 1 minute
"DN" ------------------Decrease 1 minute
Set time of operating shutter management function.
(Valid only when in the normal Power ON status)
Details
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable

8.9.58 CF_SHUTEFFECT Command

Command "CF_SHUTEFFECT_%1" [CR]
"OFF" --------Disable fade in and out function of Shutter
%1 "L1" --------- Set fade in and out function of Shutter to L1
"L2" --------- Set fade in and out function of Shutter to L2
Set Effect function of Shutter. (Valid only when in the normal Power ON status)
When L1 is selected, projected image quickly fade in and out
Details
When L2 is selected, projected image slowly fade in and out.
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
54/101
.