Character Entry Method
In character entry screens, use the procedure below to enter characters.
Keys Used
Use the following keys to enter characters.
1. OK Key
2. Clear Key
3. Back Key
4. Cursor Keys
5. Numeric Keys
6. Reset Key
7. Right Select Key Press this key to select the type of characters you want to enter. (When [Text] is
Appendix-2
1
7
3
Press this key to finalize the entered character(s).
Press this key to delete the character at the cursor position. If the cursor is at the end of
the line, the character to the left of it is deleted.
Press this key to return to the screen from which you invoked the character entry screen.
Use these to select the entry position, or select a character from the character list.
Use these keys to select the character you want to enter.
Press this key to cancel the character entry procedure and return to the standby screen.
displayed)
4
5
2
6
OPERATION GUIDE