Kyocera FS-1128MFP Fax Manual page 96

Fs-1128mfp fax operation guide rev-3
Hide thumbs Also See for FS-1128MFP:
Table of Contents

Advertisement

FAX Operation (Advanced)
Function
Orig. Orientation
Continuous Scan
File Name Entry
Job Finish Notice
Density
Duplex
4-36
To ensure that the originals are stored in the correct
orientation, this indicates which end of the original is the top.
To use the following functions, select the orientation of the
originals.
1-sided / 2-sided Selection
Border Erase
Allows you to divide originals that cannot be placed in the
document processor at one time into multiple scans and then
store the result as a single file. With this function, originals
continue to be scanned until you press [END Scan] (the
Right Select key).
Allows you to rename the files created from scanned
originals. You can also use this function to add the job
number and/or date.
Sends a notice by an e-mail when a transmission is
complete.
Adjusts the density used for scanning originals.
Select the type and binding of originals.
9
Press the FAX key.
10
Use the numeric keys to enter the fax number.
11
If you use a sub address, press [Detail] (the Right
Select key).
12
Press the
13
Press [Edit] (the Right Select key).
14
Use the numeric keys to enter the sub address.
NOTE:
numbers from 0 to 9, ' (space)', '#' and '*' characters to
enter a sub address.
15
Press the OK key.
16
Use the numeric keys to enter the sub address
password.
NOTE:
send faxes if you enter a matching password.
You can use up to 20 digits including the numbers from
0 to 9, ' (space)', '#' and '*' characters to enter a sub
Description
or
key to select [Sub Address].
You can use up to 20 digits including the
If a password has been entered, you can only
OPERATION GUIDE

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents