Operation At The Sending System - Kyocera FS-1128MFP Fax Manual

Setup and Registration

Operation at the Sending System

When sending originals by encrypted transmission, use the Address Book registered for encryption or set
encrypted transmission when dialing directly using the numeric keys.
NOTE:
Encrypted transmission can be also used in broadcast transmission.
With encryption communication, you cannot conduct sub address communication.
FAX No. Entry:
0123456789*
[ Chain
FAX Detail:
Encrypted TX: 2/ 4
Key 02
0000
Encryption:
1 *Off
2 On
*********************
6-28
A b
] [ Detail ]
C b
[ Change ]
a b
1
Register the encryption key you have arranged with
the receiving system. (Refer to Registering an
Encryption Key on page 6-26.) When an encryption
key has already been registered, go to the next
step.
2
Press the Send/FAX key.
3
Place the originals.
4
Use the numeric keys to enter the FAX number of
the other party, and press [Detail] (the Right Select
key).
NOTE:
When encrypted transmission has been set to
a destination in the Address Book or One-touch keys,
you can use the destination.
5
Press the or
6
Press the OK key.
7
Press the or
8
Press the OK key.
key to select [Encrypted TX].
key to select [On].
OPERATION GUIDE