Copying
Changing the Number of Sets
You can change the number of copy sets during copying.
Important
❒ This function can be used only when the Sort function is turned on.
A
While "
Copying...
2
B
Press [Change Quantity].
C
Enter the number of copy sets with the number keys, and then press the
{q} key.
D
Press [Continue].
Copying starts again.
Note
❒ The range of print copies enterable in step
key is pressed.
Stack
This function groups together copies of each page in a multi-page original.
Every other page stack is shifted for ease of separation.
Important
❒ You cannot use the bypass tray with this function.
60
" is displayed, press the {Clear/Stop} key.
depends on when the {Clear/Stop}
C