A
Set the tray for the blank slip sheet.
The paper for slip sheets should be of the same size as the copy paper and also
be set in the same direction.
B
Press [Cover/Slip Sheet].
C
Press [Designate / Chapter].
D
Press [Insert Sheet].
E
Press the key to select the chapter number.
F
Select the paper tray for slip sheets.
G
Select [Before] to insert slip sheets before the desired page. Select [After] to
insert slip sheets after the desired page. Enter the page number with the
number keys.
H
Press [Number of Sheets], and use the number keys to enter the number of
sheets you wish to insert, and then press the {q} key.
I
To specify another location where to insert sheets, repeat steps
J
Select the paper tray containing the paper to copy the originals onto.
K
When you have finished specifying all settings, press [OK] twice.
L
Place originals, and then press the {Start} key.
Reference
"Tray Paper Settings", General Settings Guide.
Copier Functions
2
E
H
to
.
131