Ricoh Aficio MP 5500 S/P Operating Instructions Manual page 216

Appendix
❖ Image Repeat
• Depending on the paper size, ratio, and orientation, parts of repeated im-
ages may not be copied.
• If you use this function with "Custom Size", you can copy repeatedly the
image in the area you want by specifying the vertical and horizontal
lengths from the base point. In this case, place your original on the expo-
sure glass.
A Base point
B Horizontal length
5
C
Vertical length
❖ Centering
• Though the original is set to a different orientation from the paper loaded,
the machine will not rotate the image by 90° (Rotate copy).
❖ Erase
• The width of the erased margin varies depending on the reproduction ratio.
• If the size of the original is different from sizes listed in the following chart,
the erased margin might be shifted:
• Metric version
Exposure glass : A3L, B4 JISL, A4KL, B5 JISKL
ADF : A3L, B4 JISL, A4KL, B5 JISKL, A5KL
• Inch version
Exposure glass: 11" × 17"L, 8
ADF: 11" × 17"L, 8
10" × 14"L
• By combining "Erase Inside 1" - "Erase Inside 5", you can erase up to 5 ar-
eas at the same time.
❖ Background Numbering
• The numbers appear to overlap the copied image in some cases.
❖ Margin Adjustment
• If you set a binding margin that is too wide, part of the image may not be copied.
• When making copies in the Combine mode, the binding margin is added
to the copies after the combination is finished.
198
" × 14"L, 8
1
/
2
" × 14"L, 8 " × 11"KL, 5
1 1
/ /
2 2
" × 11"KL, 10" × 14"L
1
/
2
" × 8
1 1
/ / "L,
2 2