Ricoh Aficio MP 5500 S/P Operating Instructions Manual page 209

❖ Staple
• The following types of paper cannot be stapled:
• Postcard
• Translucent paper
• OHP transparencies
• Label paper (adhesive labels)
• Thick paper
• Curled paper
• Paper of low stiffness
• Paper of mixed sizes
• In the following cases, copies will be delivered to the shift tray without stapling:
• When the number of sheets for one set is over stapler capacity.
• When memory reaches 0% during copying.
• When using the Staple function with [1 Sided→1 Sided], [1 Sided→2 Sided],
[2 Sided→1 Sided], [2 Sided→2 Sided], [Double Copies], select K original for L
and L original for K copy.
• When using the Staple function with [1 sided→Comb 2 orig], [1 sided→2 sid-
ed:TtoB], [1 sided→2 sided:TtoT], [Double Copies], select K paper for L orig-
inal and L for K original.
• When using the Staple function [Staple: Left 2] or [Staple: Top 2] with the
Combine function [1 Sided→1 Sided], [1 Sided→2 Sided], [2 Sided→1 Sided], [2
Sided→2 Sided], [Double Copies], select K paper for L original and L paper
for K original.
• If a finisher is installed, the mixed size function and the auto paper selec-
tion function become available. These functions make it possible to choose
the paper appropriate for stapling from the mixed sizes. Prior to the oper-
ation, you should set on the feed tray the paper of the size to be used. Fol-
lowing sizes allow the stapling when mixed with other sizes.
• A3L and A4K
• B4 JISL and B5 JISK
• A4L and A5K
• 11" × 17"L and 8
" × 11"L and 5
1
• 8 /
2
" × 11"K
1
/
2
" × 8
1 1
/ / "K
2 2
Supplementary Information
5
191