not the case, the default language is English. To change the display
language, see "Display Language" on page 34.
If your phone displays a language you do not understand, you can
change it to English.
1. Press the
2. Press the
3. Enter 0000.
4. Press the
Network
Normally, the name of a network appears in the display after you
NETWORK
16:21
have turned your phone on, but sometimes there is no network that
you can use. The display then shows one of the following:
112 only
If the message
112 only
16:21
work, but you are not allowed to use it. However, in an emergency,
some operators allow you to call the international emergency number
112. See "Making Emergency Calls" on page 15.
No network
No network
If the message
06:01
range or the received signal is too weak. You have to move to get a
stronger signal.
Turning Your Phone Off
• In standby mode, press and hold the
To change the display language to English
key.
C L R
arrow key.
L E F T
arrow key.
R I G H T
112 only
No network
hear a click.
is displayed, you are within range of a net-
is displayed, there is no network within
N O
Turning Your Phone On and Off
(ON/OFF) key until you
11