Using The Phone Book - Ericsson A1018 Manual

Name
recall
Name:Embla
Position
recall
Position: 10
26 Your Personal Phone Book
When the Phone Book is Full
When phone book is full, the phone does not suggest a storage position.
If you still want to store the number, you have to erase an old number
by entering a position that is already occupied and press
Erasing a Storage Position from the Phone Book
1. Scroll to
Phone book
2. Enter, or scroll to, the position number you want to erase.
3. Press .
YE S

Using the Phone Book

There are two ways of using the phone book: you can either call a
number by using the name tag stored with it; or you can call the
number by using the memory position that the number is stored in.
Calling Using the Name
1. Clear the display.
2. Scroll to Phone book
3. Enter the name of the person you want to call, or scroll with the
arrow keys until you find it.
4. Press to call the number.
YE S
Shortcut to Name Recall
The digit keys 2–9 correspond to the first names that start with A, D,
G, J, M, P, T and W respectively. For example, press and hold down
the 4 key to find the first name that starts with a G. Then you can
scroll with the arrow keys to find the name you are looking for.
If there is no name stored under G, the first name under H is dis-
played, and so on.
Calling Using the Position
1. Clear the display.
2. Scroll to
Phone book
3. Enter the position number you want to call, or scroll with the
arrow keys until you find it.
4. Press to call the number.
Y E S
Speed Dialling (Memory Positions 1–9)
Note! Speed dialling can only be used when the phone is in standby.
1. Clear the display.
2. Enter the position number, 1–9, and press
, , , .
Erase
Y ES Y E S
, , Name recall ,
Y ES Y E S
, ,
Position recall
Y ES
Y ES
.
, .
Y E S
.
YE S
.