Ericsson A1018 Manual page 8

8 Preparing Your Phone for Use
Charging the Battery
1. Make sure that the battery is
attached to the phone.
2. Connect the charger to the
mains.
To indicate charging:
• the battery meter in the display pulses continuously,
• the indicator on the top of the phone shows a steady red light
(or green, if the phone is turned on).
When the battery is fully charged, the battery meter in the display is
full and the indicator on the top of the phone shows a steady green
light.
Tip! You can use the phone while the battery is being charged.
However, this increases the charging time.
Disconnecting the Charger
• Bend the plug connected to the phone upwards and pull it out.
3. Connect the charger to the
phone as shown in the pic-
ture. The flash symbol on the
plug must face upwards.