Ericsson A1018 Manual page 33

Settings
< Ring type >
(Mix)
Ring type
< Mix >
B
Tip! Press 0, followed by
the ring signal silently.
Ring Signal Type
You can choose the type of ring signal from a list of different sounds
and melodies. You can also compose a melody of your own by enter-
ing notes with the keypad (see "Your Own Ring Signal" on page 33).
To choose one of the ring signal types
1. Scroll to Settings
2. Scroll until you find the ring signal type that you want.
3. When you reach the ring type you want, select it by pressing
Different Ring Signals for Line 1 and Line 2
If you subscribe to the Alternate Line Service (ALS),
can set different ring signals for the two lines.
Different Ring Signals for Speech, Data and Fax Calls
If you have turned the
Faxes and Data" on page 70), you can set different ring signals for
speech, fax and data calls respectively.
Your Own Ring Signal
You can compose your own ring signal.
To compose a ring signal
1. Scroll to Settings
2. Press to clear the display.
C L R
3. Use the keypad to enter notes.
The keypad now works as a keyboard (see figure in margin):
• Press and hold a key to enter a long note.
• Press 0 to raise the note one octave.
4. To listen to your melody, press
Press again to save it or press
Y E S
Reset
You can reset some settings to their default values. If you do so, the
following settings are affected:
• all settings in the
melody,
• the ring signal volume,
or
L E F T R I G H T
, , Ring type ,
Y E S Y E S
on (see "Sending and Receiving
Data menus
, , EditMelody ,
Y E S Y ES
YE S
N O
Settings menu, except your own ring signal
Personalizing Your Phone
to change the volume of
.
L1 and
.
.
to continue editing.
.
Y E S
L2 , you
33