The Battery - Ericsson A1018 Manual

Hide thumbs Also See for A1018:
Table of Contents

Advertisement

The Battery

Your phone comes with a nickel metal hydride (NiMH) battery.
The battery is not charged when you buy your phone, but there may
be enough power to turn the phone on. We recommend that you
charge the battery before you use the phone for the first time.
Attaching the Battery to your Phone
• Place the battery on the back of the phone and push until you hear
a click.
When to Charge the Battery
The nickel metal hydride battery that comes with your phone can be
charged whenever you wish, without affecting its performance. This
is not the case with the cheaper nickel cadmium type batteries, often
sold as accessories by other suppliers. For the best talk and standby
time in the long run, we recommend that you use only Ericsson origi-
nal batteries with your phone.
To remind you that you will soon need to charge the battery or
replace it with a charged one:
• an alarm signal (a long beep) sounds and the message
appears for ten seconds in the display – the signal is repeated sev-
eral times,
• the indicator light on the top of the phone starts flashing red.
Note! The phone turns itself off when the battery can no longer power
it satisfactorily.
Preparing Your Phone for Use
Battery low
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A1018s

Table of Contents