Advanced-Port Pvid Configuration - NETGEAR GS108T - ProSafe - Gigabit Smart Switch Software Administration Manual

Figure 4-12
b. To assign a port to or remove it from the VLAN, select the check box under an individual
port number.
5. Click Apply to confirm any settings changes.
Note: When the port-based VLAN type is configured, an ingress (incoming) packet with
an IEEE 802.1Q tag is ignored and preserved.
Advanced—Port PVID Configuration
The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface.
There are certain requirements for a PVID:
• All ports must have a defined PVID.
• If no other value is specified, the default VLAN PVID is used.
• If you want to change the port's default PVID, you must first create a VLAN group that
includes the port.
Configuring Switching
GS108T Smart Switch Software Administration Manual
v1.0, December 2007
4-15