Each port on the GS108A switch automatically configures itself correctly when you plug in a device’s cable. If you have a problem with your switch, NETGEAR offers technical support 24 hours a day and 7 days a week on the Web (www.NETGEAR.com), by e-mail (support@NETGEAR.com) and by phone (see the provided support information card for phone numbers).
Page 4
GS108A Installation Guide (this document) • Warranty/support information card If you don’t have everything listed above, see the support information card for contact information. If you’re missing the support information card itself, get contact information at www.NETGEAR.com in the Technical Support section.
Prepare to Install the Switch Decide where you want to place the switch. Find a flat horizontal surface — such as a table, desk or shelf. The switch comes with wall-mounting screws. You’re welcome to use the screws if you want to hang the switch in an open space on a wall. Make sure the selected location is: •...
Install the Switch and Connect the Other Devices Apple G4 PC with Server with GA311 GA311 Adapter modem Adapter LOCAL 10/100M INTERNET 12VDC 1.2A GS108A ProSafe 8-Port 10/100/1000 Mbps FVS318 ProSafe VPN Firewall Gigabit Ethernet Switch 1. Place the switch on a flat surface or hook onto the screws. 2.
If the socket is controlled by a light switch, make sure the switch is in the on position. • Make sure you are using the NETGEAR power adapter supplied with your switch. The Port number light is not lit for a connected device or stays on continuously There’s a hardware connection problem.
Page 8
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the product described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.