Memory Logs - NETGEAR GS108T - ProSafe - Gigabit Smart Switch Software Administration Manual

• Info. Specifies whether informational messages are logged. Select one of the following
values from the drop-down list:
– On. Specifies that informational messages are logged.
– Off. Specifies that informational messages are not logged.
• Debug. Specifies whether debug messages are logged. Select one of the following values
from the drop-down list:
– On. Specifies that debug messages are logged.
– Off. Specifies that debug messages are not logged.
3. Click Apply to confirm any settings changes.

Memory Logs

The Memory Logs screen displays the messages that are logged in the RAM memory in the way
that you specified in the previous section:
1. Select Monitoring > Log > Memory Logs. A screen similar to the following displays.
Figure 6-7
Under Memory Logs, the following fields are displayed:
• No. Shows the entry number for the log.
• Index. Shows the global sequence number for the log.
• Time. Shows the time when the log is recorded.
• Level. Shows the severity of the log.
• Message. Shows the detailed description of the log entry.
Monitoring, Maintenance, and Help
GS108T Smart Switch Software Administration Manual
v1.0, December 2007
6-11