Advanced-Lldp Configuration; Advanced-Lldp Port Settings - NETGEAR GS108T - ProSafe - Gigabit Smart Switch Software Administration Manual

• Notification Interval (5–3600 sec). The interval at which notifications are generated
when remote MSAP information changes. The default value is 5 seconds.
• Fast Start Count (2–10). The number of successive LLDP frame transmissions for one
complete fast-start interval. The default value is 4.
5. Click Apply to confirm any settings changes.
Advanced—LLDP Configuration
The Advanced LLDP Configuration screen is identical to the Basic LLDP Configuration screen.
See the previous section.
Advanced—LLDP Port Settings
When LDDP is enabled, you can view the LLDP port settings in the LDDP Port Settings screen:
1. Select System > LLDP > Advanced > LLDP Port Settings. A screen similar to the following
displays.
.
Figure 3-6
2. You can make changes to the LLDP settings for an individual port, for a group of ports, or for
all ports simultaneously:
• To change the LLDP settings for an individual port, select the check box to the left of its
port number, and then select the LLDP port settings.
Managing System Settings
GS108T Smart Switch Software Administration Manual
v1.0, December 2007
3-9