Conventions, Formats, And Scope - NETGEAR GS108T - ProSafe - Gigabit Smart Switch Software Administration Manual

• Chapter 6, "Monitoring, Maintenance, and
firmware upgrade procedure, and the help options.
• Appendix A, "Specifications and Default
and lists default feature values.
• Appendix B, "Virtual Local Area Networks
• Appendix C, "Network
port cabling connections.
Note: See the product release notes for the GS108T Smart Switch Software application
level code. The release notes detail the platform-specific functionality of the
Switching, SNMP, Config, and Management packages.

Conventions, Formats, and Scope

The conventions, formats, and scope of this manual are described in the following paragraphs:
• Typographical conventions. This manual uses the following typographical conventions:
Italics Emphasis, books
Bold User input, IP addresses, GUI screen text
Fixed Command prompt, CLI text, code
Italics URL links
• Formats. This manual uses the following formats to highlight special messages:
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note might result in a malfunction or damage to the
About This Manual
GS108T Smart Switch Software Administration Manual
Cabling," gives cabling requirements and describes some details of
equipment.
v1.0, December 2007
Help," describes the logs, the reset functions, the
Values," gives GS108T Smart Switch specifications
(VLANs)," describes some concepts of VLANs.
xi