Top Margin; Text Length - Oki CX1145 MFP Printing Manual

7 Printing from UNIX

Top Margin

The top margin position can be specified with the following option.
Option Value
tm=value
If the top margin is set too high or too low part of the text may not appear due to the printer's
unprintable region. The top margin will be ignored if it is set to a value greater than the printer's
logical page length. Setting this value may affect the number of lines specified using the page
length option.
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to set the top margin to ten lines is "lp -o tm=10 filename".

Text Length

The text length can be specified using the following options.
Option Value
tl=value
If the text length is set too high, the part of the text may not appear due to the printer's unprint-
able area. The text length will be ignored if it is set to a value greater than the printer's logical
page length minus the top margin. The text length is specified in rows from the top margin. Set-
ting this value may affect the number of lines specified using the page length option.
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to set the text length to 40 lines is "lp -o tl=40 filename".
350 Printing from an Application
Alternate
Value
Set the top margin to value lines.
Alternate
Value
Set the length to value lines.
Description
Description