Deleting A Watermark; Printing With An Overlay File - Oki CX1145 MFP Printing Manual

5 Printing from Windows
8
Select how the watermark text is printed from "Solid", "Draw as
Outline", and "Transparency".
Solid — Select this to print solid type of watermark.
Draw as Outline — Select this to print an outline type of watermark.
Transparency — Select this for a transparent watermark. Set the transparent ratio from
0 to 100% in units of 1%. You can also set the transparent ratio using the scroll bar.
9
Click [OK] to save the watermark settings.
The watermark is added or edited.

Deleting a watermark

You can delete the default watermarks. However, they cannot be restored by clicking the
[Restore Defaults] button.
1
Select a watermark that you want to delete at the "Watermark" drop
down menu.
2
Click [Delete].

Printing with an Overlay File

Using image overlays ensures that widely-used images are readily available and consistently
reproduced. Image overlays are independent documents that are merged into other documents
during printing and thereby increase the time required to print a job. To superimpose text on
your document, it may be faster to use watermarks.
To print with an overlay file, you should create an overlay file first.
P.267 "Creating An Overlay File"
If you use Image Overlays in combination with the N-up feature, the image overlay is printed
once per sheet, not once per page.
Both the overlay file and the documents on which you superimpose the overlay image must
be created at the same size, color mode, orientation, and resolution.
When printing with Overlay Image using the PSL3 printer driver from an application that can
create the PS command directly, the overlay image will not be printed. In that case, disable
the "Use PostScript Passthrough" option in the PostScript Settings dialog box.
282 Printing with Extended Print Functionality