Installation For Smb Printing By Point And Print - Oki CX1145 MFP Printing Manual

8
Click [Exit].
When a message appears asking whether to finish the installation, click [OK].
Before using the printer driver for printing, please configure the installed options of the
equipment and department code (if required) on the printer driver.
P.214 "Before Using the Printer Driver"

Installation for SMB Printing by Point and Print

The procedure to install the printer driver for SMB printing by Point and Print differs depending
on the version of Windows used.
P.89 "Windows NT 4.0/2000/XP/Vista/Server 2003"
P.91 "Windows 98/Me"
It assumes using SMB printing by Point and Print in a small network. If you can use the Win-
dows NT 4.0, Windows 2000, Windows XP, Windows Vista, or Windows Server 2003 as a print
server, it is recommended to set up for printing via Windows print server. For further information
about setting up printing via a Windows print server, see the Network Administration Guide.
The Font Manager is also available to install and manage the TrueType fonts on your computer.
To install the Font Manager, you must install it from the Drivers & Network Utilities CD-ROM sep-
arately.
Windows NT 4.0/2000/XP/Vista/Server 2003
Installing the printer drivers for SMB printing by Point and Print
The following describes an installation on Windows XP. The procedure is the same when other
versions of Windows are used.
You must log into Windows as a user who has the "Administrators" or "Power Users" privilege.
You must log into Windows as a user who has the "Administrators" privilege when using Win-
dows XP/Vista/Server 2003.
Installing Client Software for SMB Printing 89