Paper Source - Oki CX1145 MFP Printing Manual

7 Printing from UNIX

Paper Source

The paper source can be selected using the following options.
Option Value
auto-source
manual
drawer1
drawer2
drawer3
drawer4
LCF
In PostScript Deferred Media Selection is always turned on so the paper size has priority over
the paper source. In PCL5e the paper size always has priority over the paper source.
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to specify the LCF paper source is "lp - o lcf filename".
Duplexing
The current duplex mode can be specified using the following options.
Option Value
simplex
duplex
sduplex
If this option is not specified, the default value "simplex" will be used.
It is not necessary to specify duplexing for Booklet Mode (sduplex). Setting duplexing separately
can override the booklet mode setting for duplexing.
Example: The command to specify long edge duplexing is "lp -o duplex filename".
340 Printing from an Application
Alternate
Value
Select auto paper tray selection.
Select Bypass Tray.
upper Select the 1st drawer.
cas1
lower Select the 2nd drawer.
cas2
pedupper Select the 3rd drawer.
cas3
pedlower Select the 4th drawer.
cas4
lcf Select the LCF. LCF is not available for some countries
or regions.
Alternate
Value
Turn duplexing off.
lduplex Turn duplexing on with long edge binding.
duplex_long
duplex=long
hduplex
duplex_short Turn duplexing on with short edge binding.
duplex=short
vduplex
Description
Description