MSI NF750-G55 - Motherboard - ATX User Manual page 55

▶ Power Button Functon
Ths feature sets the functon of the power button. Settngs are:
[Power Off] The power button functons as normal power off button.
[Suspend] When you press the power button, the computer enters suspend/
sleep mode, but f the button s pressed for more than four seconds,
the computer s turned off.
▶ Restore On AC Power Loss
Ths tem specfies whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[Off] Always leaves the computer n the power off state.
[On] Always leaves the computer n the power on state.
[Last State] Restore the system to the status before power falure or nterrupt
occurred.
▶ Wake Up Event Setup
Press <Enter> and the followng sub-menu appears.
▶ Wake Up Event By
Settng to [BIOS] actvates the followng fields, and use the followng fields to set the
wake up events. Settng to [OS], the wake up events wll be defined by OS.
▶ Resume From S3 By USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus-
pend to RAM) sleep state.
▶ Resume By PCI Devce (PME#)
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PME (Power Management Event).
▶ Resume By PCI-E Devce
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PCIE devce.
▶ Resume By RTC Alarm
The field s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
MS-7578 MS-7578
3-15