MSI NF750-G55 - Motherboard - ATX User Manual page 47

▶ IDE Prmary Master/ Slave, AHCI Port 1~5 (SATA1~4) & E-SATA
Press <Enter> to enter the sub-menu, and the followng screen appears.
▶ Devce / Vendor / Sze
It wll show the devce nformaton that you connected to the SATA connector.
▶ LBA/Large Mode
Ths allows you to enable or dsable the LBA Mode. Settng to Auto enables LBA
mode f the devce supports t and the devces s not already formatted wth LBA
mode dsabled.
▶ DMA Mode
Select DMA Mode.
▶ Hard Dsk S.M.A.R.T.
Ths allows you to actvate the S.M.A.R.T. (Self-Montorng Analyss & Reportng
Technology) capablty for the hard dsks. S.M.A.R.T s a utlty that montors your
dsk status to predct hard dsk falure. Ths gves you an opportunty to move data
from a hard dsk that s gong to fal to a safe place before the hard dsk becomes
offlne.
Important
IDE Prmary Master/ Slave, SATA 1~4 are appearng when you connect the HD de-
•
vces to the IDE/ SATA connectors on the manboard. AHCI Port1~5 and E-SATA
wll appear after you adjust the opton to [AHCI Mode] n Integrated Perpherals →
On-Chp ATA Devce → RAID Mode.
• SATA5 and E-SATA port only can use wth ACHI mode and RAID mode.
▶ Floppy Drve A
Ths tem allows you to set the type of floppy drves nstalled.
MS-7578 MS-7578
3-7