Installing And Configuring Monitoring In The High Availability Environment - Novell PLATESPIN ORCHESTRATE 2.0.2 - UPGARDE GUIDE 10-09-2009 Upgrade Manual

3 Deselect the PlateSpin Orchestrate Monitoring Service, make sure that the PlateSpin
Orchestrate Server is the only component selected, then enter
display the high availability section of the script:
Gathering information for upgrading PlateSpin Orchestrate Server . . .
Select whether this is a standard or high-availability server
s) standard
h) ha
- - - - - -
Selection [standard]:
4 Enter
hostname or IP address that is to be used for configuring this server instance.
5 Continue with the upgrade configuration script, providing the information required.
Make sure you select port 8080 for the User Portal; port 80 is to be used for the Monitoring
Server.
6 When the script presents the question of whether to use the existing license file, enter
Because this is an upgrade the existing license does not work for the upgraded server. You need
to provide a new license file. Enter the path to the new license file.
7 At the configuration summary section of the script, confirm the data you have supplied, then
enter
8 On other machines in the cluster where the Orchestrate Server was upgraded, copy the new
license key (
2.8.6 Installing and Configuring Monitoring in the High
Availability Environment
When you have completed configuring the Orchestrate Servers for the high availability
environment, you need to install PlateSpin Orchestrate Monitoring (both the Monitoring Server and
the Monitoring Agent) and then restart the Orchestrate Server instance in the clustering tools.
IMPORTANT: Before you install and configure the Orchestrate Monitoring Service, make sure that
the Orchestrate Servers are not bound to port 80.
You should following the steps in the following sections in the following order to install and
configure Orchestrate Monitoring after you upgrade to PlateSpin Orchestrate 2.0:
1. "Installing the Monitoring Components" on page 53
2. "Configuring the Monitoring Service" on page 53
3. "Preparing the Orchestrate Primary Monitoring Server" on page 55
4. "Preparing the Orchestrate Secondary Monitoring Server(s)" on page 55
5. "Configuring the Heartbeat2 High Availability Client" on page 56
52 PlateSpin Orchestrate 2.0 Upgrade Guide
to indicate that this is a high availability server, then enter the fully qualified cluster
h
to proceed with the upgrade of the server.
yes
) in
key.txt /opt/novell/zenworks/zos/server/license
to finish the selection. and
f
n
.
(no).