March 20, 2008 (Sles 10 Sp2); Managing Multipath I/O; A.4.1 Managing Multipath I/O - Novell LINUX ENTERPRISE SERVER 10 SP2 - STORAGE ADMINISTRATION GUIDE 05-15-2009 Administration Manual

A.4 March 20, 2008 (SLES 10 SP2)
Updates were made to the following section. The changes are explained below.
Section A.4.1, "Managing Multipath I/O," on page 127

A.4.1 Managing Multipath I/O

The following changes were made to this section:
Location
Section 5.2.6, "Supported Architectures
for Multipath I/O," on page 47
Section 5.2.7, "Supported Storage Arrays
for Multipathing," on page 47
Section 5.4.5, "Creating and Configuring
the /etc/multipath.conf File," on page 55
Section 5.6, "Configuring Path Failover
Policies and Priorities," on page 59
Section 5.8, "Configuring Multipath I/O
for the Root Device," on page 67
Change
This section is new.
This section was reorganized for clarity.
The
/etc/multipath.conf
create it.
This section is new.
DM-MP is now available and supported for
in SUSE Linux Enterprise Server 10 SP1 and later if all online
updates have been applied. More specifically, you need
mkinitrd 1.2-106.61 and
or later.
file does not exist unless you
/boot and
multipath-tools 0.4.7-34.23
Documentation Updates 127
/root