A Documentation Updates; May 15, 2009; Managing Multipath I/O; A.1.1 Managing Multipath I/O - Novell LINUX ENTERPRISE SERVER 10 SP2 - STORAGE ADMINISTRATION GUIDE 05-15-2009 Administration Manual

Table of Contents

Advertisement

Documentation Updates
A
This section contains information about documentation content changes made to the SUSE Linux
Enterprise Server Storage Administration Guide since the initial release of SUSE
Server 10. If you are an existing user, review the change entries to readily identify modified content.
If you are a new user, simply read the guide in its current state.
Refer to the publication date, which appears on the title page, to determine the release date of this
guide. For the most recent version of the SUSE Linux Enterprise Server Storage Administration
Guide, see the
Novell documentation Web site for SUSE Linux Enterprise Server 10 (http://
www.novell.com/documentation/sles10/#additional).
In this section, content changes appear in reverse chronological order, according to the publication
date. Within a dated entry, changes are grouped and sequenced alphabetically. Each change entry
provides a link to the related topic and a brief description of the change.
This document was updated on the following dates:
Section A.1, "May 15, 2009," on page 125
Section A.2, "November 24, 2008," on page 126
Section A.3, "June 10, 2008," on page 126
Section A.4, "March 20, 2008 (SLES 10 SP2)," on page 127
A.1 May 15, 2009
Updates were made to the following section. The changes are explained below.
Section A.1.1, "Managing Multipath I/O," on page 125

A.1.1 Managing Multipath I/O

The following changes were made to this section:
Location
Section 5.8, "Configuring Multipath I/O
for the Root Device," on page 67
Change
DM-MP is available but is not supported for
in SUSE Linux Enterprise Server 10 SP1 and later if all
root
online updates have been applied. More specifically, you
need
1.2-106.61 and
mkinitrd
34.23 or later. However, if you install the packages and set up
the configuration, you might run into update issues later.
Full multipath support is available in SUSE Linux Enterprise
Server 11.
®
Linux Enterprise
/boot
and
/
0.4.7-
multipath-tools
Documentation Updates
A
125

Advertisement

Table of Contents
loading

This manual is also suitable for:

Linux enterprise desktop 10 sp2

Table of Contents