Novell LINUX ENTERPRISE SERVER 10 SP2 - STORAGE ADMINISTRATION GUIDE 05-15-2009 Administration Manual page 84

5e Click Create to create the RAID device under the
The device is given a name such as
md0
6 Specify a human-readable label for the device.
6a Select Action > Create > EVMS Volume or Compatible Volume.
6b Select the device that you created in
6c Specify a name for the device.
Use standard ASCII characters and naming conventions. Spaces are allowed.
6d Click Done.
7 Create a file system on the RAID device you created.
7a Select Action > File System > Make to view a list of file system modules.
7b Select the type of file system you want to create, such as the following:
7c Select the RAID device you created in
7d Specify a name to use as the Volume Label, then click Make.
The name must not contain space or it will fail to mount later.
7e Click Save to create the file system.
8 Mount the RAID device.
8a Select Action > File System > Mount.
84 SLES 10 SP2: Storage Administration Guide
.
ReiserFS File System Module
Ext2/3FS File System Module
/dev/evms/md
, so its EVMS mount location is
md0
Step 5.
Step 5, such as
/dev/evms/md/md0
directory.
/dev/evms/md/
.