Novell LINUX ENTERPRISE SERVER 10 SP2 - STORAGE ADMINISTRATION GUIDE 05-15-2009 Administration Manual page 21

/dev/sda1 /boot reiser defaults 1 1
3 In the Device Name column, modify the location of the
so it can be managed by EVMS. Modify only the device name by adding
evms
path:
/dev/evms/sda1 /boot reiser defaults 1 1
4 Save the file.
The changes do not take effect until the server is restarted. Do not restart at this time.
5 Continue with "Make a New initrd" on page
Make a New initrd
1 Open a terminal console, and log in as the
2 At the console prompt, enter
mkinitrd
This creates a new
initrd
take effect until the server is restarted. Do not restart at this time.
3 Continue with "Disable the boot.lvm and boot.md Services" on page
Disable the boot.lvm and boot.md Services
Disable the and
boot.lvm
now handles the boot.
1 In YaST, click System > System Services (Runlevel) > Expert Mode.
2 Select boot.lvm.
3 Click Set/Reset > Disable the Service.
4 Select boot.md.
5 Click Set/Reset > Disable the Service.
6 Click Finish, then click Yes.
The changes do not take effect until the server is restarted. Do not restart at this time.
7 Continue with
"Enable the boot.evms Service" on page
Enable the boot.evms Service
The service should be enabled automatically after the install, but you should verify that
boot.evms
it is enabled.
1 In YaST, click System > System Services (Runlevel) > Expert Mode.
2 Select boot.evms.
3 Click Set/Reset > Enable the Service.
The B runlevel option is automatically selected.
4 Click Finish, then click Yes.
The changes do not take effect until the server is restarted.
21.
root
file with the correct settings for the boot device. The changes do not
services so they do not run at boot time (runlevel B). EVMS
boot.md
partition from
/boot
user.
21.
21.
Using EVMS to Manage Devices
to
/dev /dev/
to the
/evms
21