Configuring A Protected Agent For Access - Novell ACCESS MANAGER 3.1 SP1 - AGENT GUIDE Manual

15b In the URL Path List, specify the following path:
/nesp
15c Click OK twice.
15d To add a second protected resource, click New, specify a name, then click OK.
15e For the contract, select the contract you want to use for authentication.
15f In the URL Path List, specify the path to the application. For the sample payroll
application, this is the following path:
/payroll
15g Click OK twice.
16 In the Protected Resource List, make sure your J2EE protected resources are enabled, then
click OK.
17 Click the Access Gateways link.
18 On the Access Gateways page, click Update.
19 Continue with "Configuring a Protected Agent for Access" on page

2.5.3 Configuring a Protected Agent for Access

1 In the Administration Console, click Devices > J2EE Agents > Edit.
2 Fill in the fields:
Identity Server Cluster: Select the Identity Server you want the agent to trust for
authentication by selecting the configuration you have assigned to the Identity Server.
The [None] option is used as the default, before you configure the agent.
Contract: Select the type of contract, which determines the information a user must supply for
authentication. By default, the Administration Console allows you to select from the following
contracts and options when specifying an authentication contract.
Name/Password - Basic: Specifies basic authentication over HTTP, using a standard
login pop-up provided by the Web browser.
Name/Password - Form: Specifies a form-based authentication over HTTP, using the
Access Manager login form.
61.
Configuring the Agent for Authentication 61