Table of Contents
Advertisement
14 (Optional) Verify and test the installation:
To verify that the agent is installed, see
Installed," on page
To test the agent, see
page 42
15 The J2EE Agent must be configured before users can access resources. Continue with
Chapter 2, "Configuring the Agent for Authentication," on page
1.5.4 Deploying the Example Payroll Application
You can use a sample application to test the agent installation:
1 In the WebLogic Administration console, click Deployments in the Domain Structure list.
2 Click Lock and Edit.
3 Click Install.
4 In the location field, click the server.
5 Browse and select the payroll application
/opt/novell/nids_agents/examples
<Install_Directory>\sampleapp
6 Click Next.
7 Select Install this deployment as an application, then click Next.
8 Accept the default settings, then click Finish.
9 To start the Payroll application, click Activate Changes.
10 Restart the WebLogic server.
For more information on testing the configuration, see
on page
94.
1.6 Verifying If a J2EE Agent Is Installed
1 To verify the installation of the agent, log in to Administration Console, then click Devices >
J2EE Agents.
If the installation was successful, the IP address of your agent appears in the Server list. The
import into Administration Console can take a few minutes, so if your agent does not appear in
the list, wait a few minutes, then refresh the screen.
If an agent starts to import into the Administration Console but fails to complete the process,
the following message appears:
Server agent-<name> is currently importing. If it has been several minutes
after installation, click repair import to fix it.
42
Novell Access Manager 3.1 SP1 Agent Guide
Section 1.6, "Verifying If a J2EE Agent Is
42.
Section 1.5.4, "Deploying the Example Payroll Application," on
PayrollApp.ear
directory on Linux.
directory on Windows.
45.
from the following location:
Section 7.2.4, "Testing the Configuration,"
Advertisement
Chapters
Table of Contents
