Create A Network Folder - NETGEAR DGN2200v3 User Manual

N300 wireless adsl2+ modem router
Hide thumbs Also See for DGN2200v3:
Table of Contents

Advertisement

Available Network Folders
Folder Name. Full path of the Network folder.
Volume Name. Volume name from the storage device (either USB drive or HDD).
Total Free Space. The space currently available on the storage device.
Share Name. You can click the name shown or you can type it into the address field of
your Web browser. If Not Shared is shown, then the default share has been deleted and
no other share for the root folder exists. Click the link to change this setting.
Read/Write Access. Shows the permissions and access controls on the Network folder.
Selecting All no password allows all users to access the Network folder. You are
prompted to enter the same password that you use to log in to the modem router.

Create a Network Folder

You can create a network folder on the USB device that is attached to the USB port on the
rear panel of the modem router.
To create a network folder:
From the USB Storage (Advanced Settings) screen, click the Create Network Folder
1.
button to open the Create a Network Folder screen:
Type a name in the Folder field.
2.
You can specify the folder's share name, read access, and write access from All-no
password to admin.
The password for admin is the same one that is used to log in to the modem router
main menu. By default it is password.
Click Apply so that your changes take effect.
3.
N300 Wireless ADSL2+ Modem Router DGN2200v3
USB Storage
72

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents