Create A Network Folder - NETGEAR MBR1310 User Manual

NETGEAR Mobile Broadband 11n Wireless Router MBR1310
Table 4. USB Storage (Advanced Settings) (continued)
Fields
Access Method Network
Connection
HTTP
HTTP (via
Internet)
FTP
FTP (via
Internet)
Available Folder Name
Network Folders
Volume name
Total and Free
Space
Share Name
Read and Write
Access

Create a Network Folder


To create a network folder:
1. From the USB Storage (Advanced Settings) screen, click the Create Network Folder
button to open the Create Network Folder screen:
Description
Enabled by default, this allows all users on the LAN to have access
to the USB drive.
Disabled by default. If you enable this setting, you can type
http://readyshare to access the USB drive.
Disabled by default. If you enable this setting, remote users can type
http://readyshare to access the USB drive over the Internet.
Disabled by default.
Disabled by default. If you enable this setting, remote users can
access the USB drive through FTP over the Internet.
Full path of the network folder.
Volume name from the storage device (either USB drive or HDD).
The current utilization of the storage device.
• You can click the name shown, or you can type it into the address
field of your web browser.
• If Not Shared is shown, then the default share has been deleted,
and no other share for the root folder exists. Click the link to
change this setting.
Shows the permissions and access controls on the network folder.
• All-no password allows all users to access the network folder.
• admin prompts you to enter the same password that you use to
log in to the router main menu.
USB Storage
43