Lan Setup - NETGEAR DGN2200v3 User Manual

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as DHCP and Routing
Information Protocol (RIP). The modem router is shipped preconfigured to use private IP
addresses on the LAN side and to act as a DHCP server. The modem router's default LAN IP
configuration is as follows:
LAN IP address. 192.168.0.1
•
Subnet mask. 255.255.255.0
•
These addresses are part of the private address range designated by the Internet
Engineering Task Force (IETF http://www.ietf.org/) for use in private networks, and should be
suitable in most applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in the LAN Setup screen.
If you change the LAN IP address of the modem router while
Note:
connected through the browser, you are disconnected. To
reconnect, open a new connection to the new IP address and log in.

To change the LAN settings:
Select Advanced > LAN Setup.
1.
Enter the LAN Setup configuration and click Apply to save your changes.
2.
N300 Wireless ADSL2+ Modem Router DGN2200v3
Advanced Settings
81