Connection Status; View Attached Devices - NETGEAR DGN2200v3 User Manual

Connection Speed. Typically, the downstream speed is faster than the upstream speed.
•
Line Attenuation. The line attenuation increases the farther you are physically located
•
from your ISP's facilities.
Noise Margin. The signal-to-noise ratio, which is a measure of the quality of the signal on
•
the line.
Poll Interval. The interval at which the statistics are updated in this window. Click the
•
Stop button to freeze the display.

Connection Status

In the Router Status screen, click the Connection Status button to display a screen similar to
this:
Connection Time. The time elapsed since the last connection to the Internet through the
•
DSL port.
Connecting to sender. The connection status.
•
Negotiation. On or Off.
•
Authentication. On or Off.
•
Getting IP Address. The IP address assigned to the WAN port by the ISP.
•
Getting Network Mask. The network mask assigned to the WAN port by the ISP.
•

View Attached Devices

The Attached Devices screen shows all IP devices that the modem router has discovered on
the local network.
N300 Wireless ADSL2+ Modem Router DGN2200v3
Network Maintenance
63