Click Add to open the following screen.
2.
Fill in the fields:
3.
In the Route Name field, enter a route name for this static route. This name is for
•
identification purpose only.
Select Private if you want to limit access to the LAN only. The static route will not be
•
reported in RIP.
Select Active to make this route effective.
•
Enter the destination IP address of the final destination.
•
Enter the IP subnet mask for this destination. If the destination is a single host, type
•
255.255.255.255.
Enter the gateway IP address, which has to be a router on the same LAN segment as
•
the modem router.
In the Metric field, enter a number between 2 and 15 as the metric value. This
•
represents the number of routers between your network and the destination. Usually,
a setting of 2 or 3 works.
Click Apply to save your changes. The Static Routes table is updated to show the new
4.
entry.
Universal Plug and Play
Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers,
access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network.
N300 Wireless ADSL2+ Modem Router DGN2200v3
Advanced Settings
90