Step 1: Set Up Your Speakers - Yamaha RX-V363 - AV Receiver Owner's Manual

Step 1: Set up your speakers

Place your speakers in the room and connect them to this
unit.
OUT DVD DTV/CBL
HDMI
DOCK COMPONENT VIDEO
DVD DTV/CBL DVR MONITOR
OUT
P
R
DIGITAL INPUT VIDEO
P
B DVD DTV/CBL DVR MONITOR
IN OUT OUT
OPTICAL
Y
CD
MULTI CH INPUT AUDIO
DVD DTV/CBL DVR CD
FRONT SURROUND CENTER
IN OUT
DTV/
CBL
L L
DVD
R R
COAXIAL
SUBWOOFER
1
Place your speakers and subwoofer in the
room.
2
Connect speaker cables to each speaker.
Cables are colored or shaped differently, perhaps with
a stripe, groove or ridge. Connect the striped
(grooved, etc.) cable to the "+" (red) terminals of
your speaker. Connect the plain cable to the "–"
(black) terminals.
3
Connect each speaker cable to the
corresponding speaker terminal on this unit.
1 2
1 Make sure that this unit and the subwoofer are
unplugged from the AC wall outlets.
2 Twist the exposed wires of the speaker cables
together to prevent short circuits.
3 Do not let the bare speaker wires touch each other.
4 Do not let the bare speaker wires touch any metal
part of this unit.
ANTENNA SPEAKERS
SURROUND CENTER FRONT B
R L R L
AM
GND
FM
75
UNBAL.
OUTPUT
IN MD/ OUT
(PLAY) CD-R (REC)
SUB
WOOFER
R FRONT A L
3 4
Be sure to connect the left channel (L), right channel
(R), "+" (red) and "–" (black) properly.
Front speakers
Loosen Insert
To the front right
speaker
Center and surround speakers
Press
down
To the surround
right speaker
4
Connect the subwoofer cable to the input
jack on the subwoofer and the SUBWOOFER
OUTPUT jack on this unit.
Subwoofer
Input jack
Subwoofer cable
Quick start guide
Tighten
To the front left
speaker
Insert Release
To the center speaker
To the surround
left speaker
AV receiver
SUBWOOFER
OUTPUT jack
5
En